Case study Grade II listed home

Chris and Phil have a Grade II Listed building which means special permission is required to make certain alterations to the appearance of building. In addition, the building is an older property which means particular consideration must be given to the handling of the fabric of the building because the modern materials used to retrofit newer buildings might not be technically suitable. The retrofit work started in 2014 and continues on today, which is quite characteristic of the type of deep retrofit required for a listed building, where planned work takes place when permissions, finances and time for the inevitable disruption allow.

Windows

Double glazing is often not permitted in listed buildings. Sometimes bespoke windows that are replicas of the original style are allowed by heritage officers, but usually secondary glazing is required. Chris and Phil were allowed to fit double glazing in one window, because any secondary glazing, having a larger profile, would have blocked the fire exit. However they were required to fit a special window with customised glass that was not visible from the outside. The other windows were fitted with double glazing. In addition a double layer of perspex has been fitted to windows and doors using magnetic strips to further improve thermal insulation. This method can be done DIY, but there are companies who can provide made to measure Perspex panels to do the job.

Insulation

Underfloor insulation has been installed between floorboards and joists. In the hallway a layer of Superfoil (SFI9FR) has been inserted. More underfloor insulation is planned. The external walls have been papered with V600 thermal liner. This is like very thick wallpaper and helps to reduce heat loss and eliminate damp corners. The next plan is to add a layer of insulating plaster inside the external walls, focussing first on areas where most heat escapes. The house benefits from a conservatory. Initially this was a modern, plastic construction, but the heritage officers allowed them to replace that with a more thermally efficient one. It is triple glazed and supplied by IQ. The roof window shuts automatically when it rains. Conservatories can be an excellent source of solar gain. On sunny days this conservatory warms the whole of the rear of the house. On sunny but cold days, hot air is pumped from the conservatory into the lower hallway. The walls in the conservatory are covered with 100mm PAVADENTRO wood fibre insulation boards and coated in lime plaster. The external doors are fitted with draught strips, a flap for draughts through the letterbox and escutcheon on the keyhole.

Energy generation and storage

The house has a limited array of solar voltaic panels on the roof. Because it is in a conservation area, the panels must not be visible from the public road and must be unobtrusive from both front and rear. They are actually hidden within the valley roof. Energy from the pv cells goes to a battery under the stairs. On a sunny day enough electricity is generated and stored to keep everything going until sunrise the following day. There is a wood burning stove in the drawing room, but this has not been used because the heat from the solar insolation in the conservatory is enough. Wood burning stoves in 2023 were subject to improved safety regulations. However even the new low emission stoves produce more particulates than are desirable for good health.

Find more posts in these categories:
Find more posts with these tags: