Keeping your home cool during hot weather – longer-term actions

This article was written by Bob Whitmarsh, a long term WinACC volunteer who has a particular interest in home energy and retrofit.

Our previous blog ‘Keeping your home cool during hot weather – immediate actions’ talked about what you can do today to keep your home cooler in hot weather. This blog aims to suggest longer-term actions that will permanently limit windows from being a source of overheating.

Windows are often the Achilles heel that allow homes to overheat in summer because sunlight penetrates the glass and warms the room inside. Once that heat has got into a room it is hard to remove it because the warmed up floor, walls, ceiling and furniture in the room reradiate heat as infrared energy which can only weakly penetrate the glass (in essence this is the greenhouse effect).

The answer to this problem is either to block the sunshine outside before it reaches the window or to attempt to limit the heating inside after sunshine has passed through the window. The choice of solution will depend on the quality of the glazing in the window and on the cost; outdoor solutions are mostly more expensive and so it may be worth trying an indoor solution first. On average, external shading is 3 to 4 times more effective at blocking solar heat than internal blinds or curtains.

Indoor solutions

The simplest solution is to apply a special window film, designed to reflect solar radiation, to the inside of the window but this can also reduce indoor light levels.

A huge range of blinds is available for installation within window recesses including roller, Roman and Venetian blinds. The most effective way to reduce passive solar gain is to install a made-to-measure thermal blind (some blinds are also described as blackout blinds but this feature is not essential). A thermal blind with a cellular construction lined with aluminium foil works best. Some blinds are designed to be installed without needing to drill any holes in the walls of the recess and they can even be motorised.

Some companies offer internal slatted shutters.

Lastly, it is worth checking the properties of your double glazing (compare Solar Heat Gain Coefficients[1]). Today double glazing that rejects the most radiation contains low emissivity (low-E) glass and has an inert gas between the panes. If your glazing is not up to the highest standard it might be worth replacing it. This is usually a quick job that doesn’t require any modification of the uPVC frame itself.

Outdoor solutions

A reflective external film will reduce heat more efficiently than an internal film but it will create a mirror-like appearance from the outside during the day. External film will clearly be more susceptible to the weather and may have a lifetime of no more than seven years.

Traditionally continental buildings in hot European countries had hinged exterior wooden shutters which are very effective at keeping out the sun but here in UK our outward opening windows largely prevent this. Today many 20th century or later buildings on the continent reduce passive solar gain by having external roller blinds. In the UK equivalent external roller blinds, Venetian blinds or louvres in metal frames, for rigidity, can be retrofitted but they are expensive.

One inexpensive solution is an outdoor roller blind made from bamboo or wood which is operated from the outside. This is a relatively cheap solution but it will be exposed to sun and rain all year round and maybe vulnerable to strong winds.

Another solution possibly suitable for some windows is a semi-rigid curved canopy or awning designed to fit over outside doors.

Some simple awnings can be clipped onto sash windows and are fitted from the inside. Another option is a retractable awning, housed in a cassette when not required, which is sometimes motorised. Some such awnings, which project further from the window, have rigid folding or hinged supports.

A final suggestion is a fixed ‘brise soleil’ (literally from the French for ‘break sun’) slatted screen fitted to the wall above, or to the side of, a window. These are more often seen on commercial buildings where they are quite common.

In some circumstances small trees or shrubs in leaf can provide shade. Unless the tree is transplanted or potted this may be a very long-term solution in the sense that the tree will have to grow first.

Some other shading ideas can be found here.

All the external solutions will alter the appearance of the home to some extent so it is best to check, especially if you live in a conservation area or a listed building, with your local planners whether you need planning permission.

Note that all of the above solutions will work for first floor windows. At the least the installation may be more expensive because the installer will need a ladder or scaffolding. Similarly blinds and awnings may need to be motorised whereas at ground level they can usually be operated manually.


[1] Solar heat gain coefficient is the fraction of the sun’s energy that passes through a window, door, or skylight and enters your home as heat (also known as the G factor). It’s measured on a scale from 0 to 1, where 0 means no solar heat gets through and 1 means all of it does.

Find more posts in these categories:
Find more posts with these tags: