Plug-in solar for all – a detailed look

What is plug-in solar?

Plug-in solar panels usually consist of one or two photovoltaic panels with a cable that can be plugged directly into a 13A socket so that in sunny weather some household appliances can run directly off the panels. In most circumstances the panels can be installed without calling on a professional electrician. The panels are designed to be fixed vertically on the balcony of a flat or apartment (although they could equally be fixed to a wall, or non-vertically to a roof or free standing in a garden). They are not intended to replace more productive roof top panels.

Millions of plug-in solar panels are already used on the continent. There they can be paid for feeding electricity into the grid and they can be used to charge a battery. Unfortunately, in UK current government regulations, unlike those that apply to roof top solar, do not allow either of these features. However it is to be hoped that, as experience is gained from early adopters of this technology, that the rules may be relaxed.

General principles around using any type of solar panel

To make the best use of any solar panel, including plug-in solar, you will need to be aware of some general principles concerning their siting. These factors are:

  • Deciding on a suitable space and orientation and slope of the panels
  • Absence of significant shading of the proposed panels

In the UK the optimum tilt angle for any solar panel is 35-40° from the horizontal.  Vertically oriented PV panels, as might be used on a balcony, typically produce 20–30% less energy annually than optimally tilted systems. Southwest or southeast orientations will give around 90% of the optimum south-facing aspect and east or west facing panels will provide around 80%. The impact of all these factors on electrical output can be estimated here.

Another important factor is whether you are at home during daylight hours. In principle the electricity generated by larger, non-plug-in, PV panels will be used in real time by whatever appliances are switched on and any excess can be saved in a battery for later use such as in the evening. If neither of these situations applies then, provided the panels have been professionally installed, the electricity may be exported to the grid.  Depending on your supplier, you may then receive a payment sometimes called the Feed-in Tariff, Export Tariff or the Smart Export Guarantee. Clearly, someone living at home all day will be able to make more direct use of solar electricity than someone who is out most of the day.

A lot of advice and information about solar panel in general can found online here, here and, specifically about plug-in panels, here. In addition free over the phone advice (for Hampshire, Southampton or Portsmouth residents) is available here. 

What’s different about plug-in solar panels?

Plug-in panels, commonly as a pair, are smaller than most rooftop panels and therefore generate less electricity. They come with a built-in microinverter, the device that converts DC electricity into the AC electricity that is used around the home.  This means they can be installed by anyone because they simply plug in to a 3-pin 13A mains socket, probably in the form of a weatherised external socket, and that they can be taken with you if you move home.

Plug-in solar panels are widely used on the continent in Germany, Spain and elsewhere by people living in apartments with balconies. Around half the people In the EU live in flats; in England the figure is 23%. Because they are essentially portable it may be possible to install them without the permission of the building manager or landlord. In principle plug-in solar panels can also be used by homeowners, who maybe don’t have a suitable roof, to set up a panel in their garden or on a wall. They might also suit someone who is beginning to find out how solar PV works for them.

Are plug-in solar panels suitable for use in the UK?

In July 2026 the Department for Energy Security and Net Zero (DESNZ) published a Plug-in Solar Device Interim Product Specification. This spells out the technical and safety requirements for plug-in solar photovoltaic devices. It is available here. This document sets limitations on how plug-in solar PV panels can and cannot be used.

  • Only one plug-in solar PV product is allowed per household ring main
  • There is a limit of 800W on the output from the plug-in panels
  • Plug-in solar panels cannot be used with a battery (as happens in Germany for example)
  • Modern residual current protection is required 

Users should read and understand the detailed instructions supplied by the manufacturer. If the user is in any doubt about their installation they should consult a professional electrician

The enabling regulations around plug-in solar were laid before Parliament on 17 July 2026 and come into force on 27 August. The catch is that any plug-in panels coming on sale after 27 August must comply with these regulations. It appears that few, if any, panels currently (late-August 2026) on sale actually comply.

There are also safety concerns among some experts around checking a home’s wiring before installation and the potential need for bidirectional residual current devices (RCDs; most UK RCDs are unsuitable). Another concern is home insurance cover. Finally, tenants may need to get the permission of their landlord or building manager before installing plug-in solar.

What appliances can a plug-in panel supply?

On a sunny day a pair of plug-in panels is expected to generate less than 800 watts. This is enough electricity to supply a fridge/freezer, vacuum cleaner, Wi-Fi, laptop or TV but not higher demand appliances such as a kettle, toaster, oven, electric hob, dishwasher, tumble dryer, electric shower or charging an EV. Plug-in panels do not appear to be suitable for delivering DC electricity directly to, say, a smart phone or car battery.

 What will be the cost and will they save me money?

Plug-in solar panels work at a much smaller scale than roof top solar panels which in turn deliver much less electricity than a single solar farm. But every little helps. In effect there is only a zero or minimal installation cost plus the cost of the panels themselves, but also the savings, will be proportionally less. Nevertheless, over a year plug-in solar may make useful savings depending on how the home’s occupants use electricity.

400-500W plug-in solar panels cost under £500 each. An 800W plug-in solar panel installed vertically in a south-facing location is estimated to generate 506 kWh per year (or 719 kWh if tilted at 40°). The fraction that will be used immediately by the household will depend on their circumstances but, given that a battery installation is not yet allowed, the remainder will be exported to the grid. Unfortunately, at present, payments for exported electricity from plug-in solar do not appear to be provided by UK suppliers.

Of course any electricity saved will also reduce your carbon footprint to the tune of 0.131 kg carbon dioxide per kWh (so 500 kWh will save at most 66 kg) using the government’s recommended conversion factor.

Our advice

Unless you are desperate to try out how, relatively cheaply, you can make use of solar it might be better to wait until the situation changes to allow one or more of the following:

  • A battery can be connected to the plug-in panels
  • Payments are made by suppliers for exported electricity

In any event wait until 27 August 2026 to make a purchase, when the new regulations come into force, only buy compliant panels, and tell your distribution network operator about the installation.

Bob Whitmarsh

August 2026

Find more posts in these categories:
Find more posts with these tags: