Tackling Insulation
Insulating the roof
See Checking your roof insulation
Insulating cavity walls
The majority of homes have cavity walls – two leaves of brick or blockwork separated by a cavity, typically between 50 and 150mm wide. The cavity on older homes was intended simply as a barrier to rain ingress, however in recent years the cavities have increasingly been filled with insulation to reduce heat loss.
In most cases, installing insulation in the cavity is a good idea – our notional three-bedroom semi would save around £145 annually in heating costs, and reduce carbon emissions by 660kg. Before insulation is installed, the walls and cavities should be closely inspected by a surveyor – in a small minority of cases walls may be unsuitable for insulation without further work.
Insulating a solid wall with external insulation
External wall insulation: a case study by the Centre for Sustainable Energy
Insulating windows
Even the very best triple glazing lets out more heat than a cavity wall filled with insulation so it is important to fit the best glazing you can afford. Old single glazed windows are six times worse than the best triple glazing and even A-rated modern double glazing provides an improvement of more than a factor of two over an old double doubled glazed window with air between the panes.
Double (or triple) glazing can be fitted one window at a time according to your finances but the warming effect will be noticeable straight away. In the long run it is better to choose A-rated double or triple glazing and spread out the upgrade over a year or two than to fit more, but lower rated, windows at a faster rate. Remember than double glazing also provides soundproofing.
Replacing outside doors
It is worth replacing an outside door if it contains lots of single-glazed glass and/or it doesn’t fit the door frame well and lets in draughts? Well insulated solid doors are available today with double-glazing inserts which can even be bought together with a factory-made, perfectly fitting (draught-free) door frame. This is also an opportunity to get rid of a draughty letter box.
Insulating the floor
It is usually not feasible to insulate a solid floor underlain by a concrete screed but it is possible to insulate a suspended floor covered in wooden floorboards. If there is sufficient height under the floor the simplest approach is to insulate from underneath by installing batts of solid foam between the joists. There are even robots that can crawl around the void space and spray foam insulation on the underside of the boards. But many DIY’ers prefer to take up all the boards in a room and install solid foam or mineral wool insulation from above.
More info from the Energy Saving Trust